Auto Cot Grinding Machine with Servo Control System
Technical Specifications
The main table of Machine it is working on Servo Control System attached with ball screw of 10 pitch i.e. 1 round of the ball screw will move 10 mm in a very accurate manner. The Grinding Wheel Head it is attached Servo Control System with ball screw having pitch 5 i.e. in 1 round this ball screw will move 5 mm. Feeding Magazine having the capacity of 80 to 90 top rollers for storage. Grinding Principle - Wheel head stationery & table movement is on To and Fro. Efficient dust collection unit is incorporated with the machineGrinding Wheel Operation
The Grinding Wheel move very quick upto 1 mm thereafter it will move very slowly to touch the top roller and it will start Grinding the top roller in three step : 1) Ruff Grinding 2) Fine Grinding and 3) Polishing. The accuracy of the Grinding top roller will be eccentricity 0.01 mm and taper 0.01 mm. The Grinding Wheel will adjust the diameter automatically. The Machine is having auto dressing which is attached on the center less grinding attachment and once you feed in the HMI that after this much number of rollers will grind and thereafter dressing device will start for the dressing of Grinding Wheel. While putting the top roller in center less grinding attachment 1st you have to adjust the offset of the diameter and once you have enter in HMI thereafter you can run the Machine in automatic mode and all the rollers after grinding will have the same diameter what you have feed in HMI. The Machine will be zero maintenance free subject to you have to follow our instruction for the operation and maintance of the Machine. The Machine’s power required 3.5 HP 3 phase power and 2 KW single phase power required for Servo Control System.
