RISHABH TEXTILE EQUIPMENTS PVT. LTD. PANNA SPIN EQUIPMENTS PVT. LTD. RIA ENGINEERING COMPANY
 Mr. R.K.Shah
+91 99090 18926
WORLD LEADER IN
SPINNING ROLL SHOP
      MAINTENANCE EQUIPMENTS


Roving Reminent Yarn Conversion Machine


<< Back



Technical Specification
  • 12 NOS. SPINDLES WITH RUNNING SPEED OF 18 MTRS TO 35 MTRS PER MINUTE TO UNWIND THE REMINENT YARN.
  • THE REMINENT YARN WILL PASS THROUGH CYCLONIC NOZZLE TO OPEN THE TWIST OF THE REMINENT YARN & TO PULL OUT THE FIBRE WHICH WILL TRANSFER THROUGH THE HEADERS WITH VACUUM SUCTION IN A NATURAL FORM FIBRE WITHOUT DAMAGING THE PROPERTY OF THE FIBRE, WHICH WILL BE COLLECTED IN THE COTTON COLLECTION CHAMBER.
  • NO COMPRESSED AIR IS REQUIRED.

PRODUCTION :
TWO TO THREE LAYERS REMINENT YARN OF THE BOBBIN CAN BE CLEANED PER HOUR 120 TO 150 BOBBINS.

* OUR NEW DESIGNED MACHINE REQUIRED THE INSTAL POWER OF 4.5 KW.

* RUNNING POWER WILL BE CONSUMED 2.7 KW TO 3.2 KW.

* UNIT CONSUMPTION PER HOUR -3 (UNITS)

* PRODUCTION CAPACITY PER HOUR.

WE HAVE CALCULATED PRODUCTION PER HOUR FOR 3 LAYERS REMINENT YARN, WIIL BE 120 TO 150 BOBBINS IF THE LAYER IS LESS THAN 3 i.e. 1 OR 2, THEN PRODUCTION PER HOUR WILL BE 150 TO 225 BOBBINS.
THIS DEPAND ON YOUR OPERATOR EFFICIENCY.
IN OUR MACHINE YOU HAVE TO INSERT THE END OF THE ROVING & PUT THE BOBBIN IN RUNNING OF THE M/C ON THE SPINDLE. THE END OF THE ROVING BY OUR CYCLONIC NOZZEL, IT WILL OPEN THE TWIST OF THE ROVING & THE FIBRE IN A INTACT LOOSE CONDITION WILL PULL OUT WITH VACUME & IT WILL DISCHARGED IN THE COLLECTION CHAMBER, SO THE FIBRE PROPERTY WILL REMAIN INTACT WHICH CAN BE REUSED.
WHEN CHAMBER IS FULL WITH THE LOOSE FIBER THAN YOU HAVE TO PRESS PNEUMATIC BUTTON FOR THE FUNCTION OF OPENING OF THE CHAMBER AND TOTAL LOOSE FIBER WILL DISCHARGE IN THE DRUM AND AUTOMATICALY THE COVER WILL CLOSE THE CHAMBER AND THE CHAMBER BECOME TOTALLY VACUUME AND THERE AFTER YOU CAN RESTART THE MACHINE FOR THE OPERATION.